MP825ZS 250W 6 Zones Mixer Amplifier

loading...

Features:

● 6 MIC inputs, 2 AUX inputs, 1 record input, 1 record output. Mic 5/6 convertible to AUX inputs
● Phantom power for supporting different sorts of MIC input
● Priority muting for chime and siren
● Three levels of priority muting: MIC1 > Siren > Chime
● LED as output level meter
● 6 zone output, all call key control
● Individual volume control for each input, bass and treble control and master volume control
● Speaker outputs 100V, 70V and 4-16 ohm
● Thermal, overload and short circuit protection

The MP 825ZS mixing amplifier has a wide range of output power ratings and enhanced cost effectiveness. The amplifiers are designed to work with both high (100/70V) and low (4/8ohms) impedance speakers system. The LED output meter is to monitor the output signal level. It is standard 19” rack mountable with ear pieces provided and only takes up 2U of space. All in all, This six zone amplifier is the key to pa system.

Specification

Model	MP825ZS	MP838ZS
Rated Output	250W	380W
Output Regulation	Less than 3dB, from no load to full load
Speaker Output	Balanced 4Ω, 70V and 100V
REC Output	600Ω 1V
Inputs	Mic 1, 2, 3, 4, 5/600Ω, 3mV AUX 1,2 / 10kΩ, 270mV unbalanced; REC IN: 10kΩ, 300mV
Frequency Response Line	40kHz – 20kHz
Mic	80Hz – 15kHz
Distortion	<0.5% at 1kHz, 1/3 rated power
S/N Ration	Mic 1, 2, 3, 4, 5 : 80dB AUX 1, 2 : 80dB
Tone	Bass ±12dB at 100Hz
	Treble ±12dB at 10kHz
Protection	AC Fuse, DC Fuse, Overload, Short Circuit, Temperature
Power Supply	AC 240V/50Hz / DC24V
Power Consumption	330W	450W
Dimension (W × H × D)	485 × 88 × 360mm (2U)
Net Weight	16.0kg	18.3kg
Gross Weight	17.0kg	19.3kg
Muting Function	MIC 1 overrides other input signals (Attenuation: 0 -30dB) Siren overrides other input signals (except MIC 1, Attenuation: 0-30dB) Chime overrides other input signals (except MIC 1, Siren, Attenuation: 0-30dB)